HOME>Products>Back

Hot Cell® Cp Sensors For Large Batteries Model：Hot Cell® sensors

These Hot Cell® sensors are primarily intended for testing flat batteries, with focus on large-size pouch batteries and prismatic batteries. The cells are made of aluminium and have the shape of a flat square or rectangular box with rounded edges. The cell sizes are customized with a maximum width, length, and height of respectively 400 mm, 400 mm, and 100 mm. Hot Disk can arrange cells with even greater width and length upon special request. Due to the rounded edges of the cells, the maximum pouch battery size will depend on if the pouch battery is square-shaped or rectangular-shaped.

Add to Inquiry

Detail information Specification

These Hot Cell® sensors come with high-temperature foam insulation and two cable options – a standard grey-colored cable for use between -20°C to 50°C, or a red-colored silicone-clad cable for use between -60°C to 180°C. For the latter option, our grey-colored adaptor cable is needed for connection to our Hot Disk® instruments (or our sensor switch units) and is offered separately.
- Option 1: Polymer cable cladding (-20°C to 50°C)
- Option 2: Silicone cable cladding (-60°C to 180°C)

Hot Cell® Sensor – Model AL-WXXX-LYYY-HZZZ (Aluminum cell, width XXX mm, length YYY mm, height ZZZ mm)

Cell
Material	Aluminum
Shape	Square or rectangular box, flat, rounded edges
Width	Max 400 mm
Length	Max 400 mm
Height	Max 100 mm
Insulation	High temperature foam
Maximum pouch or prismatic battery size
Width	By request
Length	By request
Height	By request
Cable
Cladding	Polymer (option 1) or silicone (option 2)
Housing material	Plastic (option 1) or aluminum (option 2)
Length	2.0 m (option 1) or 1.0 m (option 2)
Connector	8-pin Lemo (male) (option 1) or 4-pin Lemo (male) (option 2)
Temperature range	-20°C to 50°C (option 1) or -60°C to 180°C (option 2)

Hot Cell® Sensor – Model AL-W400-L400-H20 (Aluminum cell, width 400 mm, length 400 mm, height 20 mm)

Cell
Material	Aluminum
Shape	Square box, flat, rounded edges
Width	400 mm
Length	400 mm
Height	20 mm
Insulation	High temperature foam
Maximum pouch or prismatic battery size
Width	363 mm (square-shaped), 277 mm (rectangular-shaped)
Length	363 mm (square-shaped), 277 mm (rectangular-shaped)
Height	20 mm
Cable
Cladding	Polymer (option 1) or silicone (option 2)
Housing material	Plastic (option 1) or aluminum (option 2)
Length	2.0 m (option 1) or 1.0 m (option 2)
Connector	8-pin Lemo (male) (option 1) or 4-pin Lemo (male) (option 2)
Temperature range	-20°C to 50°C (option 1) or -60°C to 180°C (option 2)