HOME>Products>Back

Hot Disk® Switch-8 Model：Switch-8

This benchtop eight-port sensor switch unit is ideal for large scale rapid QC testing in production lines with Hot Disk® instruments. It also allows for smooth multiple-point QC testing or R&D measurements over large sample/component areas. The switch unit comes with eight sensor ports for Hot Disk®, Hot Strip® or Hot Cell® sensors. All eight sensor ports are paired with individual PT100 temperature sensor ports.

Add to Inquiry

Detail information Specification

The switch unit is connected to the Hot Disk®/Hot Strip®/Hot Cell® sensor input of a Hot Disk® instrument via an interface cable (with 8-pin Lemo connectors, both males), which is included. In addition, a corresponding interface cable (with 4-pin Lemo connectors, both males), is included and connected to the PT100 temperature sensor input of the Hot Disk® instrument.

The sensor switch unit is controlled automatically by the Hot Disk Desktop App over USB communication (a USB cable is included). The active port is indicated in the Hot Disk Desktop App.

Hot Disk® Sensor Switch-8

Environment
Operating	15°C to 30°C
Storage	-20°C to 45°C
Supply voltage	100/240 VAC, 50/60 Hz
Power rating
Input/output
Rear panel	USB type B connector (female) for connectivity
Front panel	1 x 8 pin Lemo connector (female) for interfacing with sensor port on Hot Disk instrument
	1 x 4-pin Lemo connector (female) for interfacing with PT100 temperature sensor port on Hot Disk instrument
	8 x 8 pin Lemo connectors (female) for Hot Disk®/Hot Strip®/Hot Cell® sensors
	8 x 4 pin Lemo connectors (female) for PT100 temperature sensors
Dimensions (height x width x depth)	145 mm x 450 mm x 455 mm
Weight	7.5 kg
CE marking	Yes