Verification Sample Model:Verification Sample
This is a verification sample of optional material: stainless steel (AISI 316/316L), fused quartz (amorphous silica, SiO2), or PMMA (polymethyl methacrylate). Two identical sample pieces are supplied, each having a flat cylindrical shape of diameter 60 mm, and thickness of 20 mm. The two sample pieces come in our smaller-sized signature wooden box with aluminum lid, together with a leaflet and a USB flash drive.
-
These three isotropic bulk samples are intended for performing verification measurements with Hot Disk® instruments – via either single-sided or double-sided method. Such isotropic bulk testing mainly targets the use of our Kapton-insulated Hot Disk sensor models 7577, 5465, 5501, 8563, and 4922, as well as Mica-insulated Hot Disk sensor models 5082, 4921, and 4922. For reference, our own data from repeated double-sided measurements with these sensor models are tabulated in the accompanying leaflet and stored on the USB flash drive.
- Option 1: Stainless Steel
- Option 2: Fused Quartz
- Option 3: PMMA
-
Verification Sample
Sample Materials Two identical pieces of Stainless Steel (AISI 316/316L) (option 1), fused quartz (amorphous SiO2) (option 2), or PMMA (polymethyl methacrylate) (option 3) Shape Cylindrical, flat Diameter 60 mm Thickness 20 mm (single piece) Box Material Wood with Aluminum lid Leaflet Tabulates measurement data USB flash drive Contains measurement data